If the inclusion is unsuccessful, the red LED will be on for 2 seconds and then remain the colourful gradient status. If the inclusion is successful, the green LED will be on for 2 seconds and then return to Energy mode state when the output load is on the state (the RGB LED remains solid) or Night light mode state when the output load is off state (the RGB LED remains solid with 10% brightness of purple colour). If you want your Smart Switch to be a non-security device in your Z-wave network, you need to press the Action Button once on Plug when you use a controller/gateway to add/include your Plug. Including Smart Switch as a non-secure device: ♦ Security or Non-security feature of your Smart Switch in Z-wave network. Night light mode will allow the LED to be turned on and off during the selected time of day you have configured for it. Momentary indicate mode will momentarily turn the LED on for 5 seconds then turn off after every state change in the switch. There are 3 different modes: Energy mode, Momentary indicate mode and Night light mode.Įnergy mode will allow the LED to follow the state of the Smart Switch, when the switch is on, the LED will be on, and while the switch is off, the current colour LED will be off and then remain the purple colour of 10% brightness. You can change the mode of how the LED acts by configuring the Smart Switch.
#Xwave echo 6 manual how to
If you are using other products as your main Z-Wave controller, please refer to the part of their respective manuals that tells you how to remove devices from your network. You’ll need to use your Z-Wave network’s main controller to do this and the following instructions will tell you how to do this using Aeotec by Aeon Labs’ Z-Stick or Minimote controller. Your Smart Switch can be removed from your Z-Wave network at any time.
Removing your Plug from a Z-Wave network. You can also configure the brightness of RGB LED when the Smart Switch is in Energy mode, Momentary Indicate mode, or Night Light mode. The colour of RGB LED will change according to the output load power level when it is in Energy mode: Version LED indication Output (W) US Green [0W, 900W) Yellow [900W, 1600W) Red [1600W, 2000W) AU Green [0W, 1000W) Yellow [1000W, 2000W) Red [2000W, 2500W) EU Green [0W, 1500W) Yellow [1500W, 2500W) Red [2500W, 3000W) Please refer to your software’s user guide for precise instructions on configuring Plug to your needs. With your Smart Switch now working as a part of your smart home, you’ll be able to configure it from your home control software.
#Xwave echo 6 manual manual
If you are using other products as your main Z-Wave controller, such as a ZWave gateway, please refer to the part of their respective manual that tells you how to add new devices to your network.
The following instructions tell you how to add your Plug to your Z-Wave network via Aeotec by Aeon Labs’ Z-Stick or Minimote controller. Getting your Smart Switch up and running is as simple as plugging it into a wall socket and adding it to your Z-Wave network.
0 kommentar(er)
